TUTORIAL AKSES OLED OLED 0.96" 128x64 I2C DENGAN ARDUINO
AKSES OLED OLED 0.96" 128x64 I2C DENGAN ARDUINO Wiring Diagram Source Code AND Library I2C SCANER Source Code #include <Wire.h> void setup() { Wire.begin(); Serial.begin(9600); while (!Serial); // Leonardo: wait for serial monitor Serial.println("\nI2C Scanner"); } void loop() { byte error, address; int nDevices; Serial.println("Scanning..."); nDevices = 0; for(address = 1; address < 127; address++ ) { // The i2c_scanner uses the return value of // the Write.endTransmisstion to see if // a device did acknowledge to the address. Wire.beginTransmission(address); error = Wire.endTransmission(); if (error == 0) { Serial.print("I2C device found at address 0x"); if (address<16) Serial.print("0"); Ser